work mode does not match with the existing network

Have a question about Active Wall? Ask it here!

work mode does not match with the existing network

Postby noor » Tue May 15, 2012 10:45 pm

Hello,
i have done the installation for first time.
i have select my work mode as GATEWAY and the LAN scope subnet is 192.168.1.0 and mask 255.255.255.0.
i am getting the error " work mode does not match with the existing network topology,please re-select the work mode and lan adapter".

Please Help

Thanks
Noor
noor
 
Posts: 1
Joined: Tue May 15, 2012 10:23 pm

Re: work mode does not match with the existing network

Postby admin » Wed May 16, 2012 6:55 pm

Active wall provides gateway,bridge,bypass,redirect and single mode. If you do not select a proper work mode, active wall will not work.
For more details please read user manual [Chapter 3 Install and Uninstall/3.2. Network environments].
admin
Site Admin
 
Posts: 386
Joined: Wed Dec 31, 1969 4:00 pm


Return to Questions & Answers

Who is online

Users browsing this forum: No registered users and 1 guest

cron